REALLY bad floor question
#1
06-03-03, 08:20 AM
Visiting Guest
Posts: n/a
REALLY bad floor question
I recently had to tear up some floor tile in my bathroom.
However,when i did,i realized they had a 1 1/2 to 2 " slab that was laid inorder to install the little tiles over it.(forget the name of the slab,but it has a technical name).Well needless to say the WHOLE thing came up with the tile,and now i have the MOST godawful condition you could have before laying tile.
ANY advice on how to maybe level out the floor so i can lay the tile would be appreciated.
Thanks
However,when i did,i realized they had a 1 1/2 to 2 " slab that was laid inorder to install the little tiles over it.(forget the name of the slab,but it has a technical name).Well needless to say the WHOLE thing came up with the tile,and now i have the MOST godawful condition you could have before laying tile.
ANY advice on how to maybe level out the floor so i can lay the tile would be appreciated.
Thanks
Sponsored Links
#2
06-05-03, 08:13 PM
Visiting Guest
Posts: n/a
what that w as is mud set and it's ok what you need to do is add 1/2 plywood to what yoiu have then 1/.2 durockand then tile 
«
Previous Thread
|
Next Thread
»
Linear Mode
