Aluminum or PVC trim for tile

Reply

  #1  
Old 10-03-18, 04:06 PM
Member
Thread Starter
Join Date: Jun 2007
Location: NYC
Posts: 166
Aluminum or PVC trim for tile

I have an 36X48 shower that years ago I added a steam generator. Now I am redoing the bath room. I will have tile on ceiling and the three other walls. My wife being a wife has picked title that does not have a bullnose tile (edge) plus a 17X17 tile that I have to use on ceiling. What can I say other than great choice. I would be using a lot of this trim-window,niche and around shower doors.
Would it be OK to use Aluminum or PVC trim in the enclosed steam area. Not sure if using in the steam area would cause trouble with grout or tile.
 

Last edited by Tolyn Ironhand; 10-03-18 at 05:29 PM. Reason: Changed "title" to tile
Sponsored Links
  #2  
Old 10-03-18, 04:15 PM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Location: USA
Posts: 20,987
That's the whole point of using Schluter-profiles. They eliminate grouting and caulking, provide expansion and contraction at intersections, and protect raw edges. I'm sure it's okay in a steam room but read their faq if you have doubts.

https://www.schluter.com/schluter-us...i-steam-shower
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes