Schluter profile in shower

Reply

  #1  
Old 04-11-19, 08:31 PM
Member
Thread Starter
Join Date: Apr 2005
Location: USA
Posts: 292
Schluter profile in shower

I was thinking of using the RONDEC profile in the shower/steam rm.Because the profile is rounded I was wonder if steam would get int the rondec. Meaning the curved part might retain water from the steam,
 
Attached Images
File Type: pdf
rondec profile.pdf (63.9 KB, 7 views)
Sponsored Links
  #2  
Old 04-12-19, 04:37 AM
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 19,274
If water or steam can get in there then yes, water could collect. Keep in mind that it is not part of the water/vapor proof barrier of your steam shower. If used vertically and enough water collects it will run down to the bottom but the inside of the curve will still remain wet, possibly a good spot for mildew to thrive but it will be out of sight until it emerges at the edge which might be difficult to clean.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes