Replacing single tile
#1
I installed 12" X12 " tile this weekend and one had a hollow sound when I stepped on it. Since I have not applied the grout I tried to lift the tile and it came right up. I used 3/8 x 1/4 trowel on 1/4" wunderboard. How do I reapply the tile?
#2
Member
Join Date: Oct 2000
Location: Katy (Houston area) TX USA
Posts: 1,309
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Hi Melvin,
We would use a new tile. If you want to try to remove all the thin set from the back of the one you have, you may be able to sand it off with a belt sander or a disc sander.
John
We would use a new tile. If you want to try to remove all the thin set from the back of the one you have, you may be able to sand it off with a belt sander or a disc sander.
John
#3
My FEDDERS CKE036A fins on the coil are smashed in places not letting air through. I tried to clean and straighten, but they seem to be falling apart. Can just the coil unit be replaced or do you have to replace the whole air handler? How much should it cost to fix?