Creating a window-sixed opening in an interior, non-bearing wall
#1
08-26-03, 09:08 PM
Creating a window-sixed opening in an interior, non-bearing wall
Could someone walk me through the process of creating and trimming-out a 2' X 3' opening in an interior, non bearing, stud and sheet rock wall?
#2
08-27-03, 07:08 AM
Here are the basics.
http://www.diynet.com/DIY/article/0,2058,673,00.html
This addresses the casing and trim.
http://www.hgtv.com/hgtv/rm_door_win...374511,00.html
Hope this helps.
http://www.diynet.com/DIY/article/0,2058,673,00.html
This addresses the casing and trim.
http://www.hgtv.com/hgtv/rm_door_win...374511,00.html
Hope this helps.
