rough opening for door
#1
rough opening for door
im framing a door rough opening in a partition wall in my basement. things were going well until i realized that my rough opening is slightly narrower towards the ceiling.
at the very top of the door opening its 3/8" to narrow.
should i just leave it and shim less there, or rebuild? i was leaving 1/2" on all sides for shimming.
at the very top of the door opening its 3/8" to narrow.
should i just leave it and shim less there, or rebuild? i was leaving 1/2" on all sides for shimming.
#3
Yeah same here, I've definitely seen worse. Like Dave said, if the door jambs can still be fitted with shims & the trim covers up the imperfections, nobody but you will ever know.