DoItYourself.com Community Forums > Interior Improvement Center > Walls and Ceilings

Drywall Contractor

Thread Tools

Search this Thread

09-02-05, 10:26 AM

dan619fan

Visiting Guest

Posts: n/a

Drywall Contractor

I would like to know if anyone knows what a drywall contractor charges a sqare foot? I am from Pennsylvania. Thanks so much!

Upvote

09-02-05, 02:49 PM

thezster

Member

Join Date: Aug 2005

Posts: 2,128

Upvotes: 0

Received 1 Upvote on 1 Post

Why not call one and ask?

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Walls and Ceilings
Uneven Drywall Thicknesses

B

baklobsters on Aug 31, 2005

Hi, After reading these forums today, I realized I should have come here long before I started my drywall project. Anyways, I'm currently in the process of putting up drywall in my garage to repair walls that were damaged due to mold resulting from a dead water heater. I assumed (mistake #1) that the original drywall was 1/2" thickness. So, that's what I bought. I also assumed that by purchasing greenboard (apparently mistake #2 based on reading the other posts), I would buy myself more time for corrective action in the event my new water heater blew. So...after laying the new plywood board for my water heater pedestal (platform, whatever it's called) I cut up greenboard and laid it on top of the plywood. I then cut up greenboard and hung it on wall #1 where a 3'x3' section of the damaged drywall was removed. I then cut up a 3'x7' portion of greenboard and hung it on the back wall. At this point I realized that the drywall I just put up appeared thinner than the existing drywall. Measuring the thickness of the existing drywall revealed 3/4". I didn't realize drywall came in that thickness (and don't remember seeing any at Home Depot). Can I still tape the joints and apply enough mud to the new drywall to make this discrepency as seamless as possible? Is it even possible to apply mud on these uneven joints? Or would it be easier to just start all over again using 3/4" drywall? Thanks for any answers in advance. JimRead More
Walls and Ceilings
Drop down over sand-paint? Help!

L

laceylou on Sep 02, 2005

We just purchased a home built in the 1960's. Two of the walls in the LR are plaster and apparently had that "mix the sand in paint" thing applied to the walls. I don't love it. Two of the walls are paneled and we are having drywall put up. I want all of the walls to match, so do we "mix the sand in paint" for the newly drywalled walls? Or can we do a drop down texture over all four walls, including the ones with the sandy paint? Thanks in advance everyone!Read More

Ask a Question