Ceiling Max border tiles

Reply

  #1  
Old 02-16-07, 07:04 AM
Member
Thread Starter
Join Date: Feb 2007
Posts: 1
Ceiling Max border tiles

Does any one know how to calculate border tiles when you have a room that is not square? My room is 108" by 126". When I use the Ceiling Max border calculation I get different border tiles for each side. How do you calculate equal border tiles for this room? Thanks in advance for any tips/advice.
 
Sponsored Links
  #2  
Old 02-16-07, 03:06 PM
chandler's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Dec 2005
Location: USA
Posts: 39,968
You may very well be getting different figures, as I have never seen a square room. The ceiling max system is unique, but not too different than a drop ceiling when figuring tiles. Locate a center line of the room from both directions, measured from the corners along the wall. You will find one wall may be as much as an inch longer than the other one. From the center line, measure to the walls, and divide by the size of your tiles. Whatever is left over beyond a full tile will be divided again, and this is the size of the border tiles.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes