suspended ceiling around pipes


Old 04-26-17, 04:36 PM
Thread Starter
Join Date: Dec 2016
Location: United States
Posts: 54
Received 0 Votes on 0 Posts
suspended ceiling around pipes

Hello again! I am putting up a suspended ceiling in my new bathroom and using 2x2 PVC-material tiles. I have a large cast iron pipe that will be exposed in the bathroom, but it means I need to cut the ceiling tiles out around this pipe and I'm not sure what to use to make it look nice and professional.

The tiles cut easily with a utility knife but trying to get the right curvature around the pipe this way seems difficult.

Similarly, if the cut is a little rough (or even if it's not), Is there any sort of trim or foam that's white that I could put between the tile and the pipe? I thought about trying to caulk it but I'm not sure how well that would work. I'm open to any ideas! thanks as always!
Attached Images   
Sponsored Links
Old 04-26-17, 05:13 PM
chandler's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Dec 2005
Location: USA
Posts: 39,965
Received 6 Votes on 6 Posts
Measure from the installed panel grid to the center of the pipe in both directions. This will be center for your hole, whether it be 2 1/2" more or less. Drill or cut a hole in the panel so you have a round hole. Then split the panel to the shortest dimension edge. You can snap the panel around the pipe pretty easily. IF not, or if the panel is too thick, you may have to cut the 2 1/2" or so hole dimension to the edge making a U out of your cut, then replace the short piece and glue it in place.
Old 04-26-17, 06:29 PM
Tolyn Ironhand's Avatar
Group Moderator
Join Date: Nov 2007
Location: Twin Cities, MN
Posts: 13,638
Received 210 Votes on 186 Posts
Ceiling guys I work with cover any boo-boos with white Dap caulk.
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Ask a Question
Question Title:
Your question will be posted in: