Airtight drywall approach

Reply

  #1  
Old 11-20-19, 08:38 AM
C
Member
Thread Starter
Join Date: Dec 2011
Location: USA
Posts: 276
Received 13 Votes on 11 Posts
Airtight drywall approach

Trying to get drywall installed as airtight as possible, and had a couple of questions.

1. Great Stuff makes a drywall gasket spray foam, but unfortunately it requires its own foam gun because it's water-based (can't use regular foam gun, which I have), and there doesn't seem to be a straw applicator version of this product. Instead, can I use polyurethane caulk (such as Loctite PL Premium construction adhesive), and apply it to the framing (top/bottom plates and studs) where the perimeter of each drywall piece will attach?

2. The wall framing isn't exactly flush (some of the studs are a little twisted). I was thinking 1/2" drywall would more easily flex and make a better seal against the framing than 5/8" drywall. Is this correct? If I can get just as good a seal with 5/8" drywall, I'd rather go with that for the extra little bit of insulation.
 
Sponsored Links
  #2  
Old 11-20-19, 08:54 AM
B
Member
Join Date: Oct 2008
Location: New England
Posts: 10,514
Received 37 Votes on 34 Posts
First, if you have ever seen a drywall hammer, obviously used less to day than 40 years ago, but it has a checked hammer face on one side and a hatchet on the other. Why a hatchet, because you need to do all that is necessary to remove those twists and bends before the drywall goes up. maybe a lost step now that everyone uses a screw gun, but it is still necessary.

So chip away at the high spots and remove the bends before you hang the drywall that will produce a better job and work well with your air sealing.

Bud

PS, don't forget to seal the sheathing to the studs and all seams on top and bottom plate.
 
  #3  
Old 11-20-19, 09:19 AM
P
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 23,709
Received 620 Votes on 573 Posts
1/2" sheetrock has an R value of about .45 while 5/8" is .56. Not enough difference in my mind to be worth the added expense and more importantly the extra weight if I'm the one installing it.
 
joecaption voted this post useful.
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: