No COLD water after WH installed.


  #1  
Old 08-06-10, 01:27 PM
TimAllen2nd's Avatar
Member
Thread Starter
Join Date: Aug 2010
Location: United States
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
No COLD water after WH installed.

Had a new Gas WH professionally installed a few months ago. All is great except that I can get NO COLD water to one shower/bath in the house. All other taps get great water pressure on all settings (cold/hot/mixed). Just the one bath/shower gets boiling hot water. When selecting COLD water on the mixer, there is only a small drip that is also scalding hot. How do I get cold water pressure back to this one location? What would the plumber have turned off or blocked?
 
  #2  
Old 08-06-10, 01:59 PM
S
Group Moderator
Join Date: Oct 2004
Location: WI/MN
Posts: 19,186
Received 1,280 Upvotes on 1,218 Posts
Sounds like a mixing valve problem - sediment can get in and block off one flow, just need to take it off and clean it out
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: