water softener maintenance/repair
#1
Member
Thread Starter
Join Date: Nov 2011
Location: USA
Posts: 9
Upvotes: 0
Received 0 Upvotes
on
0 Posts
water softener maintenance/repair
I am going to buy a water softener and am wondering which brand/model is easy (acquiring parts, no special tools, etc) to maintain/repair? Also, the most reliable?
#4
The most reliable on is the Fleck 5600. It is easy to work on and the parts are available at a lot of different places. The Clack also makes a good unit if you are into electronics. There parts may not be available except for dealers which drives the prices up.
#6
There is a special tool for removing the seals and spacers but I don't use it. I just use my fingers. The 7000 has electronics IIRC. I am not into electronics on water treatment equipment.