I need help understanding / identifying what I have in my basement in my (new to me) house. Things I know for sure: 1) There is a hole in the ground with a pump in it 2) Inputs: basement bathroom (shower pan, toilet, sink), laundry sink/waste water, condensate from furnace/AC, a floor drain 3) Outputs: line that's an upside-down U to the city sewer Things I am not sure about: 1) If it also accepts foundation water 2) If this is a sump pump or sewage ejector pump Why I'm not sure: 1) Don't know how to tell if I have drain tile. To my knowledge, no flooding issues 2) Only one pipe comes out the pit; read an ejector pump should have a vent pipe coming out. 3) The lid is unsealed. Read an ejector pump should have a lid. So do you guys think I have a sump or sewage ejector? Or some type of combined system? FYI this is a house built in the 50s

I'm in a hell of a bind here. We ran out of money to finish our house/property because a nasty contractor took off with what little I had left and did NOT finish the job! We need to get our water lines in from the well to the house, but I have absolutely no idea how to even start. I was told to use 1" black poly (friend and the guy at Lowes both said this) but that's about as far as I've gotten. Complete newbie--definitely not the sort of thing I thought I'd ever be doing. Single mom, non-existant budget. Help? Well is installed about 300 ft from the house. Trench is in. House is a doublewide mobile (1984) 1: submersible pump or jet pump. : [U][B]Submersible pump:[/B][/U] [url=http://www.lowes.com/pd_313875-57366-UT301_0__?storeId=10151&Ntt=313875&UserSearch=313875&productId=3087307&N=0&catalogId=10051&langId=-1]Shop Utilitech 3/4-HP 10-GPM 3-Wire 230-Volt Submersible Well Pump at Lowes.com[/url] 2: age of well if known. [U][B]Less than 2 months.[/B][/U] 3: depth of well if known. [U][B]70 ft.[/B][/U] 4: diameter of well if known. [U][B]Unknown[/B][/U] 5: voltage of pump if known. [U][B]3/4-HP 10-GPM 3-Wire 230-Volt [/B][/U] 6: brand of pump/controller if known. [U][B]Utilitech 3/4-HP 230-Volt Control Box (not installed yet, don't know how!) [/B][/U] 7: size of tank if known. [U][B]None yet, but plan to get 86 gal.[/B][/U]