Workshop Tools & Accessories

1-40 of 461
Time-Saving Tools for Carpentry

Do you have these tools?

8 Ways to Store Tools

Garages, workshops and tool sheds can all get a little messy over time.

How to Use Hardware Cloth Around Your Home

Keep some of this handy material in your workshop for its spontaneous uses.

Pneumatic Tool Maintenance

With these few simple tips, you can keep your tools working beautifully through many DIY tasks.

How to Save Money on DIY Supplies

Make the most of your budget with these shopping tips!

7 Uses of a Bench Vise

A vise can be used in woodworking.

4 Safety Tips When Working with a Hacksaw

Hacksaws cut through hard or thick pieces of metal.

How to Use an Air Compressor to Fill a Scuba Tank

Using an air compressor to fill a scuba tank involves expensive equipment and extreme safety.

How to Bleed a Floor Jack

Using a floor jack that has air in its system is extremely dangerous.

How to Replace a Utility Knife Blade

Replacing the blade of a utility knife is an easy job.

How to Use an Air Compressor to Fill a CO2 Tank

Save time and money by filling your CO2 tank yourself.

Gas Welding Process Explained

Gas welding is a process of construction that involves the use of gases as well as oxygen to weld metals together.

Which Angle Grinder Disc Works Best For What Job?

Grit discs are among the cheapest available options for an angle grinder.

How to Wire a Voltmeter

A voltmeter is a great accessory that will help you determine how well your car's battery and alternator work.

Monkey Wrench vs. Pipe Wrench

Adjustable wrenches are handy for all kinds of different projects around the house.

How to Buy Used Tools

Save some money, but make sure you're getting a quality product!

Protect Your Eyes and Hands When You DIY

Avoid injury, learn how to choose the right eye and hand protection for the job.

14 Must-Have Tools for Homesteading

Don't start your homesteading journey without looking at this list first!

15 Essential Woodworking Tools

Get started on every woodworking project you can imagine by using these vital tools.

6 General Welding Tips for Beginners

Welding has never been simpler than this using these six helpful tips.

Products That Keep You Safe While You DIY

Stay safe and avoid injury with these products.

How to Use a Soldering Torch

Follow these 11 steps for a successful soldering project.

Proper Welding Torch Techniques

Know how to handle a welding torch for the best results.

5 Must-Have Tools for Woodworking

Want to get a start in woodworking but not sure which tools you need? You may already have them!

Pneumatic Tools

Pneumatic tools are fast becoming recognized as both affordable and indispensable to the home do-it-yourselfer.

About Air Compressors

An air compressor is the central power source and your major investment. Air compressors are available

Handywoman Workspace

Just a few years ago, many women sat back and watched their male counterparts take on the home repair

How to Weld Aluminum With an Oxy-acetylene Torch

If you have an aluminum welding project coming up, learn how you can use an oxy-acetylene torch!

How to Test a Speaker Wire With a Voltmeter

Check your speaker wires for breaks or damage with just one tool.

How to Test a Phone Line With an Analog Voltmeter

If you're having problems with a landline, a simple voltmeter is all you need for a test.

How to Repair a Hydraulic Floor Jack

Car repairs and maintenance can be hard to accomplish without a working jack, so learn what you can do.

How to Jump a Car With a Flathead Screwdriver

Did you know that you can use a flathead screwdriver to jump-start a car?

How to Fix Your Tape-Measure Retraction System

If your tape measure's retraction system is faulty, don't throw it away or buy a new one. Instead, fix it quickly in six steps.

How to Cut Corrugated Sheet Metal

Cutting corrugated sheet metal is dangerous if you don't know what you're doing. Follow this guide to cut it properly and safely.

How to Change an Angle Grinder Disc

Although replacing an angle-grinder disc takes a little bit of know-how, it's a quick do-it-yourself project that can be finished in minutes.

How to Apply a Stain Over Wood Filler

Get a polished, professional looking finish even after using wood filler by following these steps.

Soldering Guns vs. Soldering Irons

Although soldering irons and soldering guns are similar, there are advantages and disadvantages when using them for different purposes.

Workshop Planning: Building Your Own Sawhorse

Considering designing your own workshop? Start with the easiest step: build your own sawhorse!

How to Make Your Own Pressure Washer Detergent

If you're thinking of replacing your old windows with something strong, both laminated and tempered glass windows are options to think about.

A Simple Guide to Flathead Screwdriver Sizes

Screwdrivers are a necessity for your toolbox, and they come in a variety of sizes. Do you have what you need?

8 Household Replacements for a Flat Head Screwdriver

Sometimes tools go missing, but what do you do if you need a flat head screwdriver and yours is gone? Try these instead.

5 Tips to Remember When Using an Angle Grinder on Stone

An angle grinder is the way to go for cutting stone. Follow these five tips and make the job smooth and easy.

An Easy Guide to Phillips Head Screwdriver Sizes

Every toolbox needs two types of screwdrivers: flathead and crosshead. But do you know about the sizes of Phillips head drivers?

3 Common Staple Gun Problems

Learn about the most common staple gun malfunctions and how you can fix them.

How to Convert Your Metric Wrench Set to Imperial Units

Here is a quick reference guide for converting measurements between metric and imperial units.