Grind Ceramic Flashing Grind Ceramic Flashing

What You'll Need
Dremel D-Vise #2214

1. When completing work on a ceramic piece, you may find that certain areas have excess material, or "flashing," on one or more edges.

2. To remove the flashing and ensure a smooth finish, start carefully clamping the piece into the D-Vise. (It has cushioned clamps to protect your project.)

3. Using the #85422 silicon carbide grinding stone, work at the flashing until it's completely smoothed away.

4. You can also reshape areas or define detail using the #84922 grinding stone to create lines and features that are otherwise difficult to see.


Courtesy of Dremel Tools

Got a New Project You're Proud of?

Post it on Your Projects!