Butterfly bandsaw box

Post Your Project
by: SWilson on 01/13/2013 Views 2701

Budget

Tools & Materials

  • Bandsaw 1/4blade with 14 tpi
  • Chunk of wood

Summary

Had some pine that was part of a skid for some xray equipment at a local hospital. So, began making little projects from 4" X 4" skid.

Cut top and bottom pieces off. (1/4" thick) Used bandsaw to cut from tail of the butterfly to cut out inside. Glued bottom back on. Cut off 1/4" of the inside pieces and glued to lid. Lined it with blue felt from Michael's. Coated with oil based poly.

Project Journal

  • Please Wait...

Category:

Tags:

Flag as inappropriate

You May Also Like

You are about to send warning of this page to an Editor. Continue?